Daytona L4-135 2.2L SOHC Turbo (1985)
18.
Turn engine off and reinstall brown with white tracer wire into 6-way connector. Disconnect and reconnect battery connector.
19.
Reconnect radiator fan motor, coolant, and charge temperature sensors.
20.
Start engine and let speed stabilize for one minute.
21.
Engine speed should be within +/- 100 RPM's of specifications shown on the emission label.
22.
If idle speed adjustment was not required, remove logic module and replace with appropriate part:
PN 5227243 to be used for 1985 Turbo Manual PN 5227245 to be used for 1985 Turbo Automatic
The above logic modules may be used as a service part for all 1985 turbo vehicles.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
14-30-07-97
0.3 Hrs.
Check and Adjust Idle Speed
08-14-06-90
0.5 Hrs.
Check Idle Speed and Replace Logic Module
FAILURE CODE:
AM - Authorized Modification
