dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

M/T Shifter - Loose/Inoperative|Page 3276 > < Clutch Splines & Pilot Bushing - Lubrication
Page 1
background image

Shift Cable: Customer Interest
M/T Shifter - Loose/Inoperative

Models

1983-1986 Domestic Front Wheel Drive With Manual Transaxle - Car & Truck

Subject

Shift Linkage Ball Socket Disengagement

Index

TRANSMISSION

Date

March 24, 1986

No.

21-05-86

P-937-C
SYMPTOM/CONDITION

Transaxle shifter mechanism is inoperative/loose due to shift linkage disengagement.

DIAGNOSIS

Cable Linkage

Determine if the selector cable end fitting has popped off the ball stud at the transmission operating lever.

Rod Linkage

Determine if one of the white nylon rod end fittings has popped off its ball stud (see attached illustrations for locations).

PARTS REQUIRED

Ball Socket Retaining Clip PN 4340118

Number required:

1

Cable Linkage

5

1983-1984 Rod Linkage

3

1985-1986 Rod Linkage

REPAIR PROCEDURE

It will be necessary to install ball socket retaining clips to prevent ball socket disengagement.

1.

Reinstall cable/rod end fitting over ball stud.

M/T Shifter - Loose/Inoperative|Page 3276 > < Clutch Splines & Pilot Bushing - Lubrication