Daytona L4-135 2.2L SOHC Turbo VIN E FI (1988)
Exhaust Manifold: Service and Repair
Turbocharged Engine Components
REMOVAL
1.
Disconnect battery and drain cooling system.
2.
Raise and support vehicle.
3.
Disconnect exhaust pipe at articulated joint and disconnect oxygen sensor at electrical connectors.
4.
Remove turbocharger to block support bracket.
5.
Loosen oil drain back tube connector hose clamps and move tube down on block fitting.
6.
Disconnect turbocharger coolant inlet tube at cylinder block and disconnect tube support bracket.
