Daytona L4-135 2.2L SOHC Turbo VIN E FI (1988)
Tail Lamp: Customer Interest
Tail Lamp - Moisture In Lens
Models
1987-90 AG Bodies
Subject
Moisture Accumulation In Tail lamp Housing
Index
BODY AND SHEET METAL
Date
February 12, 1990
No.
23-03-90
(C23-38-9)
P-360
BODY CODE LEGEND
AG - DAYTONA
SYMPTOM/CONDITION
In the event a vehicle is returned for service due to moisture accumulation in the tail lamp, a repair has been developed to eliminate this condition. The
repair involves drilling two vent holes in each tail lamp housing and the installation of two self-adhering dust filters per housing.
PARTS REQUIRED
1 Vent, Filter
PN 4636356 (pkg. of 4)
REPAIR PROCEDURE:
1.
Disconnect the negative battery cable.
2.
Remove the rear liftgate scuff plate and lower the trim cover.
3.
Loosen the rear lower trim panel and flex it out of the way.
4.
Remove the retaining nuts from between the tail lamp closure panel and the metal tail panel. Disconnect the wire connector.
5.
Remove the retaining nuts on the luggage compartment side of the metal tail panel.
6.
Separate the tail lamp assembly from the closure panel and remove it from the vehicle.
