Daytona L4-153 2.5L SOHC VIN B (1993)
Brake Pad: Service and Repair
1.
Raise and support vehicle.
2.
Remove rear wheel and tire assembly.
3.
Remove caliper retaining bolts, then lift caliper away from adapter rails. Hang caliper from wire away from rotor.
4.
Remove outer brake pad by prying pad retaining clip over raised area on caliper, then sliding it down and off caliper.
5.
Remove inner brake pad by pulling it away from the piston.
6.
Retract piston, then reverse procedure to install. Torque caliper retaining bolts to specifications.
