Daytona L4-153 2.5L SOHC VIN B (1993)
Air Door Cable: Service and Repair
REMOVAL AND INSTALLATION
1. Disconnect the attaching flag from heater A/C control, and remove cable from the control.
Temperature Control Cable
2. Locate and disconnect the attaching flag on the Bottom of the heater A/C housing behind the floor air duct.
3. Slip cable self adjusting clip downward from the blend air door crank.
4. Insert a 3/16 diameter tool (drill bit or phillips head screwdriver shank) into the crank pin access hole and rotate the clip from the cable.
To install, reverse the preceding information.
