Daytona V6-181 2972cc 3.0L SOHC VIN 3 FI (1992)
13. Reverse the preceding operation for installation.
LOWER TAIL PANEL TRIM COVER
1. Raise lift gate to the up position.
2. Remove hidden screws holding tail panel trim cover to tail panel from carpeted area.
3. Remove push-in fasteners holding top tail panel trim to opening sill.
4. Lift up floor cover and position cover out of the way.
5. Separate cover from vehicle.
6. Reverse the preceding operation for installation.
Liftgate Trim
LIFT GATE TRIM
1. Raise the lift to the up position.
2. Disengage clips holding side moldings to lift gate. Separate moldings from lift gate.
3. Remove expanding push-in fasteners holding upper trim panel to lift gate.
4. Remove screw plugs and screws holding upper trim panel to lift gate. Separate upper trim panel from lift gate.
5. Remove screw plug and screw holding lower trim panel to rear window wiper motor, if equipped.
6. Remove screws holding lower trim panel to lift gate. Separate lower trim panel from lift gate.
7. Reverse the preceding operation for installation.
