Daytona V6-181 2972cc 3.0L SOHC VIN 3 FI (1992)
B-Pillar Seal Retainer
"B" PILLAR SEAL RETAINER
Removal
1. Remove "B" pillar weatherstrip seal.
2. Remove five screws.
3. Remove any butyl tape that may remain on reveal moulding.
Installation
1. Apply strip of butyl tape to retainer.
2. Install five screws.
3. Install weatherstrip seal.
A-Pillar Retainer
"A" PILLAR SEAL RETAINER
Removal
1. Remove screw and "A" pillar seals.
2. Remove screws from "A" pillar seal retainer.
3. Remove retainer and butyl tape.
Installation
1. Place strip of butyl tape on retainer, trim ends.
2. Position retainer and install screws.
3. Position "A" pillar seals and install screws.
