Daytona V6-181 2972cc 3.0L SOHC VIN 3 FI (1992)
T-Top Weather Strip: Service and Repair
A & B Pillar Caps
"A" and "B" PILLAR TRIM CAP
Removal
1. Remove three 3. Phillips head screws.
Installation
1. Install three 3. screws.
Roof Weatherstrip Replacement
ROOF WEATHERSTRIP
Removal
1. Remove hatch assembly and store in safe place.
2. Spray adhesive release agent in weatherstrip channel.
3. Loosen with putty knife or similar tool.
4. Remove screws from weatherstrip at butt joints.
5. Clean retainer channel with mild solvent.
Installation
1. Starting at "B" pillar, install new weatherstrip working forward.
2. Secure with suitable weatherstrip adhesive.
3. Lubricate weatherstrip with silicone spray.
4. Fit seals and secure with screws.
5. Check side glass and hatch seals and adjust as necessary.
