Daytona V6-181 2972cc 3.0L SOHC VIN 3 FI (1992)
Body Controller: Tools and Equipment
In order to perform the diagnostic tests, you need the following equipment:
^
DRBII Diagnostic Readout Box
^
1992 Diagnostic Program Cartridge
^
Body Diagnostic Cable
^
Jumper Wires
^
Ohmmeter
^
Oil Pressure Gauge
^
Voltmeter
There are diagnostic readout boxes available from other manufacturers that can be used on Chrysler vehicles. However, the diagnostic test procedures
have been designed specifically for use with Chrysler's DRBII diagnostic read-out box. It is assumed that the DRBII will be used to perform the
procedures.
Connect the DRBII to the vehicle by plugging the DRBII connector into the CCD bus diagnostic connector. This connector for the AG/AJ body system
is located in the lower left hand corner of the instrument panel in back of the fuse access panel.
