Daytona V6-181 2972cc 3.0L SOHC VIN 3 FI (1992)
Throttle Position Sensor: Service and Repair
Throttle Body Connections
Throttle Body View With Idle Air Control (IAC) Motor
Removal
1. Disconnect negative battery cable.
2. Disconnect sensor wiring at sensor.
3. Remove mounting screws (2), and lift sensor off throttle shaft.
Installation
1. Install sensor and tighten screws to 17 in-lbs (2 Nm).
2. Connect sensor electrical connector.
3. Connect negative battery cable.
