dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

PCM - Deceleration Shudder At Low Engine Speed|Page 3447 > < PCM - Deceleration Shudder At Low Engine Speed|Page 3445
Page 3
background image

10.

Type the necessary information on the Authorized Modification Label and attach the label near the VECI Label.

1992 Federal Emission Vehicles Only -

The 1992 AA, AC, AG, AJ, AP, & AS Models, With FEDERAL EMISSIONS, do not have "Flash" capacity in the PCM. Therefore, these vehicles will
require the replacement of the Powertrain Control Module.

PARTS REQUIRED:

REPAIR PROCEDURE:

This repair involves the replacement of the Powertrain Control Module with a module that has revised software.

1.

With the ignition switch in the OFF position, disconnect the battery.

2.

Remove the PCM as outlined in the appropriate Service Manual and replace it with a unit called out in PARTS REQUIRED.

3.

Connect the battery.

PCM - Deceleration Shudder At Low Engine Speed|Page 3447 > < PCM - Deceleration Shudder At Low Engine Speed|Page 3445