dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Console Replacement|Page 6278 > < Interior Moulding / Trim|Service and Repair
Page 1
background image

Console: Service and Repair
Console Replacement

Center Console

1. Position front seats fall forward.
2. Remove rear ash tray.
3. I Remove rear lower carpeted end cover.
4. Remove nuts holding console to floor bracket.
5. Position front seats full rearward.
6. Raise console storage bin cover and remove bottom mat.
7. Remove screws holding bottom of storage bin to floor bracket.
8. Remove screw. holding console side panels to instrument panel. Disengage book and loop fasteners and separate side panels from console.
9. Disconnect shift indicator cable and clips from shift mechanism through right side panel opening, if equipped with automatic transaxle. 

10. Disengage clips holding parking brake lever cover to console and separate cover from vehicle.
11. Remove center instrument panel bezel. Remove screws holding console to instrument panel.
12. Remove screws holding console to lower instrument panel.
13. Remove bolts holding console to forward floor mounting bracket.
14. Remove gear selector knob.
15. Separate console from floor and remove from vehicle.
16. Reverse the preceding operation for installation.

Console Replacement|Page 6278 > < Interior Moulding / Trim|Service and Repair