Daytona IROC R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1993)
Gauge Calibration Chart
5.
Compare the ohmmeter reading and previous gauge position with the Gauge Calibration Chart.
Multiple Gauge Malfunction
If the Voltmeter, Speedometer, Tachometer, and other gauges appear to be malfunctioning, proceed as follows:
1.
Remove the cluster.
2.
Check for ignition voltage at cavity 9 of the red cluster connector and ground.
^
If voltage is not present, repair open circuit.
3.
Check for ground continuity between cavity 14 of the red cluster connector and ground.
^
If a good ground is not present, repair open circuit.
4.
If circuits are OK and pins or connectors are not distorted, replace the printed circuit board.