Daytona IROC R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1993)
b. Tighten bolts to specifications. See Figure 3.
c. Adjust engine mount. Refer to Engine Mount Insulator Adjustment.
See: Adjustments
Front Mount
1. Support engine and transaxle assembly so engine will not rotate.
2. Remove insulator through bolt.
3. Remove front engine mount bracket to crossmember screws and nuts then the insulator.
4. Reverse procedure to install, noting the following:
a. Tighten bolts to specifications. See Figure 3.
b. Adjust engine mount. Refer to Engine Mount Insulator Adjustment.
See: Adjustments