Daytona IROC R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1993)
Fig. 27 Aligning Camshafts And Crankshaft Timing Marks
6.
Install timing belt and idler pulley in sequence shown in Fig. 27.
7.
Remove dial indicator and drills or pins from camshaft sprockets.
8.
Install belt tensioner gauge on timing belt between camshaft pulleys and adjust tension to 110 ft. lbs.
9.
Rotate crankshaft clockwise two full turns and check alignment of camshaft and crankshaft. Do not rotate crankshaft counterclockwise or
attempt to rotate engine using cam or accessory shaft attaching screw.
10.
Check belt tension, adjust if necessary.
Fig. 13 Rocker Arm Shaft Tightening Sequence.
11.
Tighten rocker arm shafts in sequence shown to specification, Fig. 13.
12.
Install valve covers, spark plug, ignition cable and ignition cable covers.
13.
Reverse remaining removal procedure to complete installation.
