Daytona Pacifica L4-135 2.2L SOHC Turbo VIN E FI (1988)
Figure 1
7.
Using the dimensions shown in Figure 1 below, drill two 6.0 mm (9/32 in.) holes (A).
Figure 2
8.
Install a vent filter (B) over each hole as shown in Figure 2.
9.
Reverse Steps 1-6 to install the tail lamp housing.
10.
Repeat the above procedure on the remaining tail lamp housing.
11.
Connect the negative battery cable.
12.
Check the tail lamps for proper operation (tail lamp, stop lamp, etc.)
POLICY:
Reimbursable within the provisions of the warranty.
Labor Operations No. 08-50-90-90
0.7 Hrs.
FAILURE CODE: 65 - Leaks