Daytona Shelby L4-135 2.2L SOHC Turbo (1989)
Front Passive Restraint System
REMOVAL
1. Remove plug from buckle boot.
2. Remove bolt through hole in boot.
3. Slide buckle off mounting tab.
INSTALLATION
1. Install buckle on tab, taking care to position mounting tab between buckle layers.
2. Install bolt and torque to 8 Nm (350 in. lbs.).
3. Install plug.
Front Outer Lap Belt Buckle
Install buckle mounting bolt and torque to 40 Nm (350 inch lbs.) and reconnect wiring (left side only).
