Daytona Shelby V6-181 3.0L SOHC (1991)
Fig. 10 Positioning timing belt tensioner
2. Install timing belt tensioner and spring. Rotate tensioner counterclockwise, Fig. 10, then temporarily tighten bolt.
Fig. 9 Timing Belt Routing
3. Install timing belt on crankshaft sprocket first, while keeping belt tight on tension side, then position belt over front camshaft sprocket, Fig. 9.
4. Then, install belt on water pump pulley and rear camshaft sprocket and finally on the timing belt tensioner, Fig. 9.
5. Rotate front camshaft sprocket in opposite direction and check that all timing marks align, Fig. 9.
6. Install crankshaft sprocket flange, then loosen tensioner bolt to allow spring to tension belt. Rotate crankshaft two complete revolutions, in
direction of normal rotation and check timing marks.
7. Tighten tensioner bolt to 23 ft. lbs.
