Daytona Shelby V6-181 3.0L SOHC (1991)
19.
Loosen primary accumulator bleeder screw, then using the DRB II select the Actuate Valves test mode and actuate RF/LR Isolation Valve.
20.
Bleed until a clean, air free, flow of brake fluid is coming out of the primary accumulator bleeder screw, or brake pedal bottoms.
21.
Tighten bleeder screw and release brake pedal.
22.
Repeat steps 18 through 21 until a clean, air free, flow of brake fluid is coming out of primary accumulator bleeder screw.
23.
Using DRB II, select and actuate RF Build/Decay Valve. Repeat steps 18 through 22, then tighten bleeder screw.
24.
Attach bleeder tube to secondary accumulator bleeder screw.
25.
Use a pressure bleeder, or with the aid of an assistant, apply light and constant pressure on the brake pedal.
26.
Loosen secondary accumulator bleeder screw, then using the DRB II select the Actuate Valves test mode and actuate LF/RR Isolation Valve.
27.
Bleed until a clean, air free, flow of brake fluid is coming out of the secondary accumulator bleeder screw, or brake pedal bottoms.
28.
Tighten bleeder screw and release brake pedal.
29.
Repeat steps 25 through 28 until a clean, air free, flow of brake fluid is coming out of secondary accumulator bleeder screw.
30.
Using DRB II, select and actuate LF Build/Decay Valve. Repeat steps 25 through 29, then tighten bleeder screw.
