Daytona Shelby V6-181 3.0L SOHC (1991)
Seat Belt: Description and Operation
Front Active Restraint System
GENERAL INFORMATION
Seat belts should be worn whenever the vehicle is in motion. The operation and mounting of the belts should not be tampered with at any time.
When removal, installation, or repair is necessary, refer to illustrations for proper system location and mounting hardware. If the belts are removed
for any reason, and the vehicle is to be driven, the seat belt retaining bolts should be reinstalled to prevent exhaust fumes from entering the vehicle.
All seat belt mounting bolts should be torqued to 350 inch pounds +/- 150 inch pounds (40 Nm +/- 17 Nm).
Rear Seat Belts
Front Inner Seat Belts
Front Outer Seat Belts
SEAT BELT AND HARNESS OPERATION
A hard pull on the shoulder belt will not lock the retractor. The retractor has a pendulum which locks the shoulder belt during rapid deceleration of
the vehicle.
