Daytona Shelby Z L4-135 2.2L SOHC Turbo VIN E FI (1988)
Front Door Latch: Service and Repair
DOOR LATCH AND ELECTRIC LOCKING MOTOR
Removal
1. Move window to down position and disconnect battery.
2. Remove trim panel.
Access Hole To Outside Handle Components
3. Partially remove air and water shields.
4. (Connect battery if window is electrically operated), move window to up position.
5. Disconnect battery if not already disconnected.
6. Disconnect lock cylinder to latch link.
7. Disconnect outside handle to latch link.
8. Disconnect inside handle to latch link.
9. Disconnect inside lock remote to latch link.
10. If lock is electrically operated, drill out the two locking motor retaining rivets.
11. Remove three latch to door bolts.
Removing Lock Motor And Latch
