Daytona Shelby Z L4-135 2.2L SOHC Turbo VIN E FI (1988)
Front Door Panel: Service and Repair
1. Move window to down position and disconnect battery, if manual regulator, remove regulator crank handle.
Mirror/Door Lock Switch Bezel
2. Using a trim stick, remove electric mirror/door lock switch bezel from armrest.
3. Disconnect wiring harness from both electric mirror and electric door lock switch.
4. Remove remote lock and latch release bezel.
5. Remove four plugs from armrest along with the screw behind each plug, and one screw in switch bezel opening.
6. Rotate and remove the armrest.
7. Remove the remaining trim panel retainer screw from the A pillar area of the door.
8. Using a trim stick, disengage all trim panel retaining clips.
9. Disconnect courtesy lamp wire.
10. Disengage trim panel from retaining hooks at the beltline.
11. Reverse procedure to install.
