Daytona Shelby Z L4-135 2.2L SOHC Turbo VIN E FI (1988)
12. Remove latch, and if so equipped, the electric locking motor.
Installation
1. Transfer electric locking motor to new latch.
2. Install latch assembly and fasten to door with three bolts.
3. Torque bolts to 8 Nm (75 in. lbs.).
4. Fasten electric locking motor to door using two short 1/4-20 bolt/nut assemblies.
5. Torque the bolt/nut assemblies to 10 Nm (90 in. lbs.).
6. Connect lock cylinder to latch link.
7. Connect outside handle to latch link.
8. Connect inside handle to latch link.
9. Connect inside lock remote switch to latch link.
10. Move window to down position.
11. Install air shield, water shield, and trim panel.
12. Connect battery.
