Daytona Shelby Z L4-135 2.2L SOHC Turbo VIN E FI (1988)
2.
Remove the two (2) screws just below the fog lamp lens (Figure 1).
3.
Remove the fog lamp assembly.
4.
Disengage rubber harness boot from socket cover and disconnect wire connectors.
5.
Rotate the plastic bulb cover on the bottom of the fog lamp approximately 1/8 of a turn counterclockwise and remove the cover (Figure 2).
6.
Disengage the bulb spring wire retainer, remove the bulb and wire (Figure 3).
7.
Install the new bulb and reassemble by reversing the above procedure.
NOTE:
BE SURE To REMOVE All CORROSION FROM THE BULB SOCKET BEFORE INSTALLING THE NEW BULB.