Diplomat L6-225 3.7L VIN E 1-bbl (1982)
Oil Pump: Service and Repair
Oil Pump Replacement
6-225
1. Drain radiator and disconnect upper and lower hoses.
2. Remove fan shroud (if equipped).
3. Raise vehicle on a hoist, support front of engine with a jack stand place under right front corner of engine oil pan. Do not support engine at
crankshaft pulley or vibration damper.
4. Remove front engine mounts.
5. Raise engine 1 {1/2} to 2 inches.
6. Remove oil filter, pump attaching bolts and remove pump assembly.
7. Reverse procedure to install.