dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Intake Air Temperature Switch > < Charge Temperature Sensor <--> [Intake Air Temperature Sensor]|Description and Operation
Page 1
background image

Charge Temperature Sensor: Testing and Inspection

    Turn ignition Off, then connect suitable ohmmeter between center terminal of temperature switch and ground for coolant temperature switch or
between center terminal and ground terminal of charge temperature switch.
    With engine cold, continuity should be present with resistance less than 100 ohms. If not, replace switch. Charge temperature switch must be cooler
than 60°F in order to perform test properly.
    With engine hot, terminal reading should show no continuity. If continuity is present, replace coolant switch.

Intake Air Temperature Switch > < Charge Temperature Sensor <--> [Intake Air Temperature Sensor]|Description and Operation