Diplomat V8-318 5.2L VIN K 2-bbl (1982)
Refrigerant Oil: Service and Repair
Oil Charge Additions
C-171
1. Discharge system and remove suction and discharge lines from compressor.
2. Remove compressor assembly from vehicle, then drain compressor oil from suction and discharge ports.
3. Add 5 fl. oz. of refrigerant oil to compressor through suction port.
4. Install compressor assembly and, using new gaskets, attach suction and discharge lines.
5. Evacuate and charge system. If any of the following components are to be replaced, oil must be added to the system:
Evaporator ...................................................................................................................................................................................................... 2 ounces
Condenser ........................................................................................................................................................................................................ 1 ounce
Filter-Drier ....................................................................................................................................................................................................... 1 ounce
