dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine - Rough Idle When Cold|Page 401 > < Engine - Rough Idle When Cold|Page 399
Page 2
background image

"Propane Idle Speed Specification Revised to 700 RPM"

Lower Section

Change Authority - TSB 14-01-83 REV A

Dealer Code - your dealer code
Date - date this procedure is performed

Install label next to or near the original VECI label.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE: Refer to Labor Operation Time Schedule manual operation propane idle speed adjust.

Technical Service Bulletin # 140183A

Date: 830411

Engine - Rough Idle When Cold

Models

*1982-1983 318 2BBL Passenger Car Federal & California Emission Systems With Carburetor PN 4179129 Except High Altitude (N-96)

Subiect

Rough Idle Cold Improvement

Index

FUEL

Date

April 11, 1983

No.

14-01-83 REVISION A

P-1045-C
*This revision is issued to now include 1982 models.

SYMPTOM/CONDITION

Subject model vehicles built before February 21, 1983 may exhibit a rough idle condition during cold engine operation.

PARTS REQUIRED

1 - Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

NOTE:

This improved propane specification change has been incorporated into production with the introduction of carburetor PN 4287088. Vehicles
equipped with tbe 4287088 carburetor do not require this service..

For correction of customer complaints of a rough idle when the engine is cold on vehicles built with the PN 4179129 carburetor, reset the propane
enriched idle speed from 760 rpm to 700 rpm using the procedure outlined in the subject model service manual.

Engine - Rough Idle When Cold|Page 401 > < Engine - Rough Idle When Cold|Page 399