Durango 2WD V6-3.7L (2009)
Trailer Connector: Description and Operation
Trailer Tow Wiring - Operation
OPERATION
If an aftermarket electric brake controller is used, the electric brake pigtail harness supplied will make installation easier. The connection (blue 4-way
connector) for the harness is located under the instrument panel to the left of the brake pedal on top of the large body harness connection. Refer to the
appropriate wiring information.
The battery line of this harness may be used to charge the trailer battery. However, a battery isolation unit is not supplied and the trailer battery may
discharge the truck battery when the engine is not running. The battery line is protected by a fuse or a circuit breaker. Refer to the vehicle glove box for
type, location, and ampere rating.
The trailer tow connectors as well as the hard wired inputs and outputs of the connectors may be diagnosed using conventional diagnostic tools and
procedures. Refer to the appropriate wiring information.
