Durango 2WD V6-3.7L (2009)
Trailer Connector: Service and Repair
Trailer Tow Connector - Installation
INSTALLATION
1. Insert the trailer tow connector (3) into the bracket (2) on the trailer hitch receiver with the 7-pin connector oriented toward the outboard side of
the bracket.
2. Using hand pressure, press the connector firmly and evenly into the bracket until both spring clips (1) on the connector housing snap into place on
the back side of the bracket.
3. Reach behind the bracket (1) to access and reconnect the connector (3) of the body wire harness to the connector receptacle on the back of the
trailer tow connector housing (2).
4. Reconnect the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician trained in
proper HEV service safety procedures must also reinstall the high voltage service disconnect into the high voltage battery pack.
