Durango 2WD V6-3.7L (2009)
Front Bumper Cover / Fascia: Service and Repair
Front Bumper Fascia - Installation
INSTALLATION
1. Place the upper edge of fascia (1) onto the center support bracket under the grille and push on to snap retainers (2) together.
2. Insert the retainer pins (3) on the ends of the fascia into the holes in the lower fender flanges.
3. Install the screws (5).
4. Connect the fog lamp electrical connectors (6).
5. Install the screws (1).
6. Install the screws (2).
