Durango 2WD V6-3.7L (2009)
Trunk / Liftgate Motor: Service and Repair
Power Liftgate Link Rod - Removal
REMOVAL
CAUTION: Lift the clips (1) only enough to release the link rod (2) from the ball stud (3).
WARNING: Never attempt to operate the power liftgate system when the link rod is removed or disconnected. Damage to the power liftgate
system will result.
1. Open the liftgate.
2. Using a small flat bladed tool (3), or equivalent, release the retaining clip (2) while pulling the ball socket (1) away from the ball stud (4).