Durango 2WD V6-3.7L (2009)
3. Remove the screw (3) that secures the seat belt turning loop (4) to the height adjuster (1) on the upper C-pillar (5).
4. Remove the screw (3).
5. Using a trim stick C-4755 or equivalent, separate the bottom edge of the trim (2) from the pillar and remove off of the upper locating tab (1).
C-Pillar Trim Panel-Installation
INSTALLATION
1. Position the upper trim panel tab (1) into the C-pillar and seat the lower side of the trim fully.
2. Install the screw (3).
