Durango 2WD V6-3.7L (2009)
Memory Positioning Module: Service and Repair
Memory Seat Module - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the driver seat cushion/cover (2) See: Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Removal.
3. Unsnap the memory seat module (4) from the side brackets.
4. Pivot the module upward and disconnect the electrical connectors (1).
5. Pull the module rearward to remove it from the front of the seat frame (3).
