Durango 2WD V6-3.7L (2009)
1. Position wind deflector assembly (1) into the roof opening (2) and slide forward to the mounting point in the U-frame.
2. Position the wind deflector hinges (1) into the U-frame at the notch (2) and secure down into the channel fully. Right side hinge shown, left side
similar.
NOTE: Placing a small rolled up piece of paper or equivalent, between the hinge and the sunroof opening may aid installation of the wind
deflector.
3. Position the front of the wind deflector over the front hinges and seat down onto the retaining clips fully.
