Durango 2WD V6-3.7L (2009)
Seat Heater: Service and Repair
Heater Pad - Removal
Front Seats
REMOVAL
NOTE: The original heater elements can be removed from the foam cushion by carefully peeling the element off along the adhesive lines.
1. Disconnect and isolate the negative battery cable.
2. Remove the appropriate seat cushion or seat back trim coverSee: Seat Cover/Service and Repair/Seat Cushion Cover - Removal.
3. Disconnect the inoperative heated seat cushion or seat back element electrical connectors (2).
4. Remove the inoperative heater element from the cushion or seat back, being careful not to remove excessive foam in the process.
Second Row
REMOVAL
NOTE: The factory installed heater elements can be removed from the foam cushion by carefully peeling the element off along the adhesive
lines.
SEAT CUSHION ELEMENT
1. Disconnect and isolate the battery negative cable.