dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Exterior Handle Switch - Installation|Page 8615 > < Exterior Handle Switch - Installation|Page 8613
Page 1
background image

Trunk / Liftgate Switch: Description and Operation
Overhead Console Switch - Description

DESCRIPTION

NOTE: The overhead console shown contains a combination power liftgate/power sunroof switch. Vehicles equipped with the power liftgate

and no sunroof contain a single power liftgate switch only.

NOTE: On vehicles equipped with both a power sunroof and power liftgate the overhead console switches are serviced together as one

assembly.

NOTE: Durango overhead console with Electronic Vehicle Information Center (EVIC) shown. Aspen overhead console similar.

The power liftgate switch (3) is mounted in the overhead console assembly (1) between the reading lamps (2). The switch is snapped into mounting slots
in the overhead console assembly. The momentary, push button-type power liftgate switch, provides a hardwired signal to the Power Liftgate Control
Module.

If the switch is inoperative or damaged the power liftgate/power sunroof switch assembly must be replaced. See: Service and Repair/Overhead Console
Switch - Removal  for the appropriate procedure.

Exterior Handle Switch - Installation|Page 8615 > < Exterior Handle Switch - Installation|Page 8613