Durango 2WD V6-3.7L (2009)
2. Position the fan blade/viscous fan drive assembly into the radiator shroud.
3. Install the radiator shroud and the fan drive assembly into the vehicle.
4. Install fan shroud retaining screws. Tighten screws to 6 Nm (50 lbs. in.)
5. Using Tool 6958, install the fan blade/viscous fan drive assembly to the water pump shaft. Tighten mounting nut to 50 Nm (37 ft. lbs.).
6. Install the upper radiator hose.
7. Fill the cooling system See: Service and Repair.
8. Connect the battery negative cable.
