Durango 2WD V6-3.7L (2009)
Compressor Clutch Relay: Service and Repair
A/C Clutch Relay - Installation
INSTALLATION
NOTE: Refer to the fuse and relay map on the inside of the PDC cover for A/C clutch relay location.
1. Position the A/C clutch relay (3) into the proper receptacle of the PDC (1).
2. Align the A/C clutch relay terminals with the terminal cavities in the PDC receptacle and push down firmly on the relay until the terminals are fully
seated.
3. Close the PDC cover (2).
4. Reconnect the negative battery cable.