dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Assembly, HVAC > < A/C Condenser - Removal|Page 6336
Page 3
background image

15. Position the upper condenser/radiator seal (2) and install the push-pin retainers (1).

WARNING: Always follow vehicle service procedures to properly connect batteries on an HEV model. Serious or fatal injury may result from

improper service procedures.

16. On HEV models, reconnect the battery system using the service disconnect at the battery pack   .
17. On gasoline only models, reconnect the negative battery cable.
18. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
19. If the A/C condenser is being replaced, add 30 milliliters (1 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple A/C

system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system See:
Specifications/Capacity Specifications/Refrigerant Oil Capacity. Use only refrigerant oil of the type recommended for the A/C compressor in the
vehicle.

20. Charge the refrigerant system See: Service and Repair/Refrigerant System Charge.

Control Assembly, HVAC > < A/C Condenser - Removal|Page 6336