Durango 2WD V6-3.7L (2009)
8. Remove the instrument panel from the passenger compartment See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Instrument Panel - Removal.
9. Disconnect the intermediate floor distribution duct from the front floor distribution duct.
10. Remove the two bolts (1) that secure the HVAC housing (2) to the passenger compartment side of the dash panel (3).
11. Pull the HVAC housing rearward so that the mounting studs and condensate drain tube clear the dash panel and remove the front HVAC housing
from the passenger compartment.
Front HVAC Housing Installation
INSTALLATION
1. Position the HVAC housing (2) into the passenger compartment with the mounting studs and the condensate drain tube in their proper mounting
locations in the dash panel (3).
2. Loosely install the two bolts (1) that secure the HVAC housing to the passenger compartment side of the dash panel.