Durango 2WD V6-3.7L (2009)
Solar Sensor: Service and Repair
Infrared Temperature Sensor - Removal
REMOVAL
NOTE: Typical overhead console shown. Infrared sensor location may vary.
1. Disconnect and isolate the negative battery cable.
2. Remove the overhead console (2) and place it on a workbench See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhead Console - Removal.
3. Remove the screw (3) that secures the infrared sensor (1) to the overhead console.
4. Remove the infrared sensor from the overhead console.