Durango 2WD V6-3.7L (2009)
Headlamp Bulb: Service and Repair
Front Lamp Unit Bulb - Removal
BULB - HEADLAMP
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician
trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
2. Remove the front lamp unit (1) from the front fender, but do not disconnect the headlamp and dash wiring from the back of the lamp housing. See:
Service and Repair/Front Lamp Unit - Removal.
3. Disconnect the headlamp and dash wire harness connector from the headlamp bulb (3) on the back of the front lamp unit housing.
4. Firmly grasp the headlamp bulb and rotate it counterclockwise about 30 degrees to unlock it.
5. Pull the bulb straight out from the keyed opening in the housing.
