Durango 2WD V6-3.7L (2009)
Vanity Lamp: Service and Repair
Vanity Lamp - Removal
REMOVAL
NOTE: Vehicles equipped with optional vanity lamps have a mirror with a single lamp that is integral to each sun visor. Each lamp is
independently controlled by an integral switch that is automatically actuated by the mirror cover. The bulb types and service
procedures are identical for each of these lamps.
1. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician
trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
2. Insert a small flat-bladed screwdriver on either side near the top or the bottom between the vanity lamp lens (2) and the lamp housing of the sun
visor (1).
3. Carefully pry the lens outward until it unsnaps from the lamp housing.
4. Using small needle-nose pliers, carefully grasp the bulb (2) and pull the base out of the lamp socket.
