Durango 2WD V6-3.7L (2009)
4. Lower vehicle and connect the transmission range sensor (5) connector.
5. Connect solenoid/pressure switch assembly connector.
6. Connect the variable line pressure connector (4), if equipped.
7. Lower vehicle.
8. Fill transmission with ATF+4, Automatic Transmission Fluid. Verify proper fluid level. See: Service and Repair/Procedures/Transmission Fill
NOTE: If the valve body has been reconditioned or replaced, it is necessary to perform the Quick Learn Procedure. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/TCM Quick Learn
