Durango 2WD V6-3.7L (2009)
2. Align reference marks on propeller shaft flange (2) and pinion flange (1). Install new companion flange (1) bolts and tighten to 115 Nm (85 ft.
lbs.)
NOTE: Flange bolts incorporate a Loctite(R) patch, new bolts should be used. If bolts are not available, clean bolts and apply Mopar(R) Lock
& Seal Adhesive or equivalent to the threads.
CAUTION: Failure to follow these instruction may result in a driveline vibration.