Durango 2WD V8-4.7L (2008)
Trunk / Liftgate Shock / Support: Service and Repair
Removal
REMOVAL
WARNING: Do not remove the liftgate support rods with the liftgate closed. The support rod pistons are operated by high pressure gas and
could cause personal injury and/or vehicle damage if they are removed with the pistons compressed (liftgate closed). Once removed, do not
attempt to disassemble or repair the support rods.
1. Open the liftgate and support.
2. Using a small flat bladed tool (3), or equivalent, release the retaining clips (2) while pulling the ball socket (1) away from the ball stud (4).
NOTE: Lift the clips (1) only enough to release the ball studs (3).