Durango 2WD V8-4.7L (2008)
Brake Caliper: Removal and Replacement
Front
FRONT
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose with result. Provide a suitable support
to hang the caliper securely.
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Compress the disc brake caliper (2).
4. Remove the banjo bolt (1) and discard the copper washers (4).
5. Remove the caliper slide pin bolts.
6. Remove the disc brake caliper from the caliper adapter (3).
Rear
REAR
