Durango 2WD V8-4.7L (2008)
correctly fitted the master cylinder should slide easily onto the booster output rod before the mounting studs are engaged in the flange holes of the
master cylinder.
7. Install the IPM (4) back in place and install the fasteners for the IPM (4).
8. Install the left front wheel well.
9. Install the vacuum hose to the check valve (2).
10. Reconnect the electrical connectors (4,5&7).
11. Install the wiper arm and cowl assembly (1) See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Wiper Arms - Installation.
